User Tools

Site Tools


This is an old revision of the document!

Star Trek: Elite Force II

Game Information

Multiplayer Information

  • Internet play: yes
  • LAN play: yes
  • Lobby search: yes
  • Direct IP: yes
  • Play via GameRanger: untested
  • Coop: yes
  • Singleplayer campaign: yes
  • Hotseat: no

The game was released by Activision. On 9th of September 2021, so roughly 19 years later, to honor the occasion of 55 years of Star Trek, the game got re-released on GOG. In principle, EF 2 is the story line successor of EF 1, also based on the Quake 3 engine. The place is no longer called Voyager but Enterprise and the Tricorder is used much more often. A few more weapons, the graphics a bit better, that's EF 2. The gameplay of the singleplayer is much better compared to the first part, especially regarding the puzzles, while the multiplayer has lost some pace.


After a law suit Star Trek games from Activision were no longer distributed. In the meantime however, it is available via GOG once again.


Required Media

GOG Release

The GOG release comes with its own installer, which works just find. Just run it and you will end up with EF 2 version 1.1 installed.

CD Release

You install from CD 1 and 2, but you only need CD 1 to play.

Steps for the CD Version

The installation from CD may cause problems if your destination partition size exceeds 2 TB. In such a case it is necessary to install manually by copying the required files from the CD. Otherwise you will be fine just installing it with the auto play installer. Continue with Patching, if needed.

Manual Installation

Simply copy the required files from the CD into a new folder and place it where you want the game to be saved to. The required files for EF 2 are the following ones:

Star Trek Elite Force II
├── base
│   ├── cgamex86.dll
│   ├── ctf_tartirus.pk3
│   ├── ctf_vor2.pk3
│   ├── dm_ctf_voy1.pk3
│   ├── gamex86.dll
│   ├── global
│   │   ├── default.cfg
│   │   ├── defaultcontrols.cfg
│   │   └── defaultoptions.cfg
│   ├── hm_ctf_exigent.pk3
│   ├── locpak1.pk3
│   ├── locpak50.pk3
│   ├── pak0.pk3
│   ├── pak10.pk3
│   ├── pak15.pk3
│   ├── pak16.pk3
│   ├── pak20.pk3
│   ├── pak30.pk3
│   ├── pak31.pk3
│   ├── pak32.pk3
│   └── pak50.pk3
├── EF2.exe
├── EF2.ico
├── snddrivers
│   ├── Mss32.dll
│   ├── Mssa3d.m3d
│   ├── Msseax.m3d
│   ├── mssmp3.asi
│   ├── msssoft.m3d
│   └── vssver.scc
├── support.ico
├── unins000.dat
├── unins000.exe
├── unins000.ini
├── unins000.msg
└── version.inf

For tools like the official EF 2 patch installer to recognize the manually installed game, you have to add your game to the Windows registry. In order to do so adjust the paths and CD-key in the following example .reg file to match your own and import it into the registry by double clicking it.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Activision\Elite Force II]
"InstallPath"="Z:\\Games\\Star Trek\\Star Trek Elite Force II"
"StartMenuFolder"="C:\\Users\\<username>\\AppData\\Roaming\\Microsoft\\Windows\\Start Menu\\Programs\\Star Trek Elite Force II"
"ef2key"="<The 16 characters of your CD key, all in upper case, no spaces>"


Depending on the version the game has after installation (can be seen in the main menu in the lower left corner), you might have to install the latest patch. Version 1.10 is the newest patch level. If you use the GOG version, this patch is already part of the installation. You might consider installing the coop mod, too. You can get the patch from here:

As always, the crack is optional for the CD version, but saves you having a CD image or the CD inserted. The GOG version does not need it, as the CD check has been removed from it. The game also runs fine under Windows 10. Higher versions have not been tried yet.

Manual Deinstallation

It might occur, that you deleted the game without doing a proper uninstall. After that, the EF 2 installer still thinks, the game is installed while it is long gone. Therefore you cannot reinstall it anymore. This problem can be solved by deleting the EF 2 registry data. In order to do so, delete the reg-folder \HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Activision\Elite Force II. After that, the installer will work just fine once again.


EF 2's campaign can also be played in Coop mode with the corresponding mod. It also includes many other fixes, e.g. resolution scaling fixes. However, it also may make your saved games incompatible. So if you decide to use it, it might be better to make a backup of your installation or do the coop patching right from the start.

There is also an amateur interview with the creator of this mod on Youtube:


Just like EF 1, EF 2 also depends on master servers to find game servers online. Currently available master servers are:

  • (, 2021-10-17)
  • (, 2021-10-17)
  • (, 2019-06-20)

The currently recommended one is (or alternatively As a replacement server (in case the first one fails), you may also use Those cannot simply be used in a cvar, like in EF 1. So you have to turn to other means to use it:

Using the Master Server Patch

The most convenient option is using the masterserver patcher ef2_multiplayer_master_server_fix-100.exe (downloadable from here). It patches the masterserver address in memory, so you won't need to alter your game at all. Simply start it instead of the normal executable. This also works with EF2.exe renamed to quake3.exe and it also allows for using the sv_master1 cvar. This way you can query a community master server (or announce your own game servers to it) once again.

Adding an Entry to Windows' Hosts File

This step is only recommended for more experienced uses, that know what they are doing. Using one of the above mentioned servers without any additional means may also be facilitated by editing the hosts file of your Windows system (%windir%\system32\drivers\etc) to let point to either one of the mentioned servers. To find out which server uses which IP, simply run ping <server-domain> in the CLI. It will print the currently used IP of that domain. When setting the coresponding line in the hosts file, make sure to not break it. Domain name resolution might suffer otherwise.

Modifying the Original File

This step is not recommended at all, as it may break your game's binary file. If you really know what you are doing, proceed. You can also try and alter the original EF2.exe directly with a hex-editor. Be aware that this might mess up the file to the point were you cannot use it any longer. So make backups of it before you try this.

Using Other Resolutions

The game does not support widescreen resolutions like 1080p in the menus but today there are other options. The easiest way is to use the coop mod, which also brings you widescreen support in the main menu. For the actual game interface (not the menus) you can set it manually:

  1. Open your game folder and switch to folder base.
  2. Create a new configuration file, e.g. set_ws.cfg.
  3. Place the following lines to use a resolution of 1920 x 1080:
seta r_mode "-1"
seta r_customwidth "1920"
seta r_customheight "1080"
seta r_customaspect "1"

The r_customaspect value may be necessary to be set, depending on the aspect ratio of your x to y resolution:

  • 4:3: 0 (default)
  • 16:9: 1
  • 16:10: 2


As for EF 1 there are single player cheats in the second part as well. The console must be usable (in the config or on the Windows console start with the switches +set ui_console 1 +set cheats 1, can also be specified in a shortcut) and then enter one of the following cheats on the EF2 console:

Cheatcode Effect
god invulnerable, unlimited ammunition
noclip No clipping mode
notarget Invisible
modellist Spawn List
health 100 100 % health
give <weapon> Give weapon weapon
kill Suicide
maplist List of maps
quit Quit game
shaderlist show shaders
kick Kicks user from server
tiki ?
rcon use remote console
flushlips ?
inventory show inventory
taunt does what it sounds like
vstr <name> runs the vstr named name
meminfo Show memory usage
echo <text> print <text>
toggle ?
reset Reset game
altbind alternative binding
altbindlist List of alternative bindings
freeze Pause game
systeminfo System information
devmap ?
centerview Center crosshairs
record <replayname> Start replay recording
stoprecord <replayname> Stop replay recording
demo <replayname> Play replay
alisdump ?
skinlist Show skin list
gfxinfo Show graphics card info
playsong Playing a piece of music
widgetcommand ?
notepad ?

See also

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
en/games/star_trek_-_elite_force_2.1634453140.txt.gz · Last modified: 2021-10-17-08-45 by 7saturn